Product Description

50g/h ozone generator, oxygen source

with oxygen generator inside

air and water disinfection

applicable for food factories, hotels, restaurants, drinking water, bottle water, swimming pool, aquaculture

excellent heat dissipation

silent work

 

available for ozone generator with output100g/h, 150g/h, 200g/h, 300g/h

with oxygen generator

Ozone output	50g/h (0-100%)	Gas source	oxygen
Ozone concentration	50-56 mg/L	Working pressure	0.05-0.25 Mpa
Working mode	Continuous work	Operation mode	Manual, unattended
Air inflow	0.24 Nm3/h	Air inflow dew point	≤-15
Cooling method	Air cool	Material	Stainless steel
Working temperature	0-40 °C	Working moisture	≤90 °C
Applicable area	1000m3	Timer	Microcomputer timer
Voltage	220V, 50Hz	Power kW/h	0.58
Size	500*600*1400mm	Weight	90 kgs

 

Illustration of structure for ozone generator

The most important part of ozone machine is ozone discharging tubes.

The electric parameters and mechanical strength of ozone discharging tubes are main factors that affect ozone efficiency, reliability and flexibility

 

Our ozone systems use non-glass insulating materials (de-hydroxyl quartz structure).

The mechanical strength and heat resistance of Titanium de-hydroxyl quartz structure is much stronger than glass discharging tubes.  The support material of discharge tubes are stainless steel tubes and ozone-resistant PVDF.

 

All discharging tubes have been tested through 3 times of operation voltage. Same tests are implemented before system assembling and using. Breakdown voltage is higher than 3 times of maximum operation voltage.

 

Comparison of discharge technology of de-hydroxyl and glass discharge structure

Advantages of de-hydroxyl discharge technology:

Easy installation

Completely sealed installation, no small particulate accumulation;

Strong mechanical strength and heat & power impact;

High corruption-resistance against nitric acid;

High damage resistance property again high voltage;

Pass tests of several times of voltage;

Performance tests of de-hydroxyl quartz structure for heat resistance and abrupt heat-cold change: burn de-hydroxyl quartz structure to red condition, put it in cold water (15--20℃) immediately, no explosion or fissuration;

High cooling efficiency;

No big area of special surface exposed to oxygen, avoid fire;

Long service lifetime of ozone generator unit: 8 years.

Vertical installation, stainless steel for outside case;

 

Features of GSL-H series (for air disinfection)

1. System composition- Ozone air disinfection system is comprised of ozone generator, air supply system (oil-free air compressor), control system, air filter system, recirculating cooling water system;
2. Ozone generator

1). Alarm for no ozone gas, do not stop automatically, will et normal when there is ozone. This function is to indicate whether discharge cell works normally; Under following conditions, alarm doesn’t work when there is no ozone gas: a- no air source supplied; b—gas pipeline blocked or leakage;

2). Backwater alarm. Turn off the machine, blow and get it dried with oxygen or dry air, it’s normal if the alarm stops after 3 second;

3). Overheat alarm and shutdown protection, get normal and work again when temperature is below 50℃, alarm stops; it may be cause by: a-- blow fan is blocked; b—environmental temperature is too high.

4). Alarm for faults of electric circuit;

5). Ozone output is adjustable from 10% to 100%;

6). Water cooling method for discharge cell, temperature of cooling water is below 30℃.

7. Ozone generator is comprised of 7-10 integrated discharge tubes, independent gas pipeline and flow control, independent electric circuit module and circuit control, independent ozone tubes.

 

Technology introduction:

These ozone generators use IGBT integrated technology, produce ozone with principle of corona discharge. Discharge chamber is comprised of de-hydroxyl quartz tubes; special design for backwater prevention (backwater won’t damage machines). Electric circuit uses module design, antioxidant elements are used for dielectric components, connectors and pipes, long service life, big corona discharge area, low temperature.

1. Use heat sinks for air cooling, adjustable ozone output;
2. Special structure design, backwater won’t damage ozone tubes;
3. Generator cell has long service life, can work continuously;
4. Small size, stable operation, stainless steel care;
5. Air source (built-in air pump);
6. Easy operation, plug in the machine and ozone gas will be produced immediately;
7. Ozone output is adjustable from 10% to 100%. Low power consumption, unattended operation;

 

Features of 50g/h and 100g/h ozone generate unit:

Ozone discharge chamber adopts Garman technology: non-glass material de-hydroxyl quartz tubes. This structure is very stable, has long service lifetime, high efficiency of discharge, high concentration of periphery discharge, don’t break down easily because of backflow water;

Excellent performance of de-hydroxyl quartz structure for heat resistance and abrupt heat-cold change: burn de-hydroxyl quartz structure to red condition, put it in cold water (15--20℃) immediately, no explosion or fissuration;

 

Technical features of ozone generators:

Ozone discharge chamber, electrode uses stainless steel material, ozone generator unit adopts high-frequency high-voltage discharge, total operation time exceeds 25000 hours. Discharge chamber is more safe, reliable, efficient.

Manual/auto operation

Ozone output is adjustable (0～100%);

Main elements of Circuit board are from Siemens (IGBT, IGBT module): this series of ozone machines are with new and advanced technology, easy operation, compact structure, stable performance, high ozone output and concentration, easy maintenance.

 

 

 

Product Image